TriParish.net - Southeast Louisiana's Most Progressive ISP!

1162 Barrow Street
Houma, LA 70360

985.879.3219

This site best viewed at
800x600 or greater.

Installing TriParish.net Dialup Accounts
on Windows 98

Install Dial-up Networking

1.	Click the Start button, point to Settings and click on Control Panel.
2.	Double-click the Add/Remove Programs icon.
3.	Click the Windows Setup tab.
4.	Click the Communications component.
5.	Click the Details button.
6.	Put a check in the box next to Dial-Up Networking.
7.	Click the OK button.
8.	Click the OK button again.
9.	Windows 95 will prompt you for your installation diskettes or CD.
10.	Wait for Dial-Up Networking to install.
11.	When you are told to restart, click the OK button.
12.	Click the Start button and choose Shut Down.
13.	Select Restart the computer?
14.	Click the Yes button.
15.	Wait for Windows 95 to restart. This may take a few minutes.

Add a Dial-up Adapter

1.	Click the Start button, point to Settings and choose Control Panel.
2.	Double-click the Network icon.
3.	Select the Configuration tab.
4.	Click the Add button.
5.	Select Adapter.
6.	Click the Add button. From the Manufacturers: list, choose Microsoft.
7.	From the Network Adapters: list, choose Dial-Up Adapter.
8.	Click the OK button.

Add TCP/IP

1.	Click the Start button, point to Settings and choose Control Panel.
2.	Double-click the Network icon.
3.	Select the Configuration tab.
4.	Click the Add button.
5.	Select Protocol.
6.	Click the Add button.
7.	From the Manufactures: list, choose Microsoft.
8.	From the Network Protocol: list, choose TCP/IP.
9.	Click the OK button.

Add Client for Microsoft Networks

1.	Click the Start button, point to Settings and choose Control Panel.
2.	Double-click the Network icon.
3.	Select the Configuration tab.
4.	Click the Add button.
5.	Select Client.
6.	Click the Add button.
7.	From the Manufactures: list, choose Microsoft.
8.	From the Network Protocol: list, choose Client for Microsoft Networks.
9.	Click the OK button.

Create a New Dial-Up Networking Connection

1.	Double-click the My Computer icon.
2.	Double-click the Dial-Up Networking folder.
3.	Double-click the Make New Connection icon.

4.	Under Type a name for the computer you are dialing, type TriParish.
5.	Click the Configure button.

6.	Check that the appropriate speed for your modem (for 14.4 modems use 19200, for 28.8 modems use 38400, and for 33.6 and 56K modems use 57600).
7.	Make sure that Only connect at this speed is not checked.
8.	Click the OK button.

9.	Click the Next button.

10.	In the Area Code and Telephone number text boxes, type your local TriParish access number. Remember to check with your local telephone company to make sure that the number you choose is a local toll-free call.
11.	Click the Next button.

12.	Click the Finish button.
13.	Click the TriParish icon.
14.	From the menu bar, click File and select Properties.

15.	Click the Server Type button.

16.	For Type of Dial-Up Server, select PPP: Windows 95, Windows NT 3.5, Internet.
17.	Uncheck Log on to network.
18.	Check Enable software compression.
19.	Uncheck Require encrypted password.
20.	Uncheck NetBEUI.
21.	Uncheck IPX/SPX Compatible.
22.	Check TCP/IP.
23.	Click the TCP/IP Settings button.

24.	Select the Server assigned IP address button.
25.	Select the Specify assigned name server address button.
26.	Check both Use IP header compression and Use default gateway on remote network.
27.	Click the OK button.

28.	Click the OK button to close the window.

RETURN TO TOP

BACK TO ACCOUNT SETUP

home | terms and conditions | support | contact