2. Choose Control Panels.
3. Select TCP/IP from the list of control panels.

4. Verify that the following information is entered as shown below:

Connect via PPP
Configure Using PPP Server
Make sure that Ip Address, Subnet Mask, and Router Address are all
< will be supplied by server >
Name Server Addr:
67.153.37.20
67.153.37.21
triparish .net for the Additional Search Domains

5. Click the close button in the top left corner

6. When it asks you to save, choose Save

7. Click on the Apple menu again.

8. Choose Control Panels.

9. Select Remote Access from the list of control panels.

10. When the Remote Access window opens, verify that Your Username and Your Password are correct.

11. Check the Save Password box if you wish for the computer to remember your password.

12. Verify Your Local Access Number in the Number box.
To find your Local Connection Number, click here. (After you locate your local number, click back on your browser window to return to this page)

13. At the bottom of the Remote Access window, click on the Options button.

14. When the Options window opens, click on the Connection tab.

15. Verify that the first two options are NOT checked.

16. Make sure that Flash icon in menu bar while connected is checked.

17. Check the other Reminders options if you wish.

18. Click OK.

19. Click on the Protocol tab.

20 . Verify that PPP is selected for Use Protocol.

21. Make sure that only the first three options are checked.

22. Click OK.